Front panel designer

Pick an enclosure or upload your own outline, drag on the parts you need, and we’ll laser cut it in aluminium or steel. Add powder coat and engraved labels if you want a finished panel.

1. Panel outline

From maker's drawing

Stock end panels use countersunk screws. We cut straight 4.2 mm holes: use pan-head screws, or ask us to countersink them.

The stock panel is 1.5 mm. You have 1 mm selected.

2. Add parts

Drag onto the panel, or tap to add at the centre.

Cut-outs

Laser engraving

Engraving isn't available to order online at the moment.

Part sizes are typical clearance holes. Parts vary between makers, so check each one against its datasheet.

GridShow parts behind panel

103 × 53 mm · front view

Dashed outlines show nuts, knobs and bezels on the front. Red dashed outlines show the part’s body behind the panel. Ctrl + scroll to zoom.